Reducing/Enlarging Copies

You can specify the magnification optionally or select the preset-ratio copying or fit-to-page copying.

In the copy mode, press the MENU button, use the button to select Enlarge/Reduce, then press the OK button.

Use the button to select the reduction/enlargement method, then press the OK button.

Ex:

Note

• Some of the reduction/enlargement methods are not available depending on the copy menu.

• Preset ratio

  You can select one of the preset ratios to reduce or enlarge copies.

  

  Use the button to select a preset ratio to match the size of your original document and printing paper, then press the OK button.

• Magnification

  You can specify the copy ratio as a percentage to reduce or enlarge copies.

  

  Use the button to specify the reduction or enlargement ratio (25 - 400%), then press the OK button.

  Note

  • Press and hold the button to quickly advance through the ratios. For details, see Key repeat.

• Fit to page

  The printer automatically reduces or enlarges the image to fit the page size.

  

  Note

  • When you select Fit to page, the size of your original document may not be detected correctly depending on the original. In this case, select Preset ratio or Magnification.

  • When Fit to page is selected, load the original on the platen.